Add one or more channels to a property's channel list, then check which connection setup is still required.

## Before you start

- Select the correct property. The **Admin → Settings - CM** route requires permission to edit **Channel Settings**. The **Org Admin → Property Edit** route requires **Org Admin** permission; Channel Settings permission alone does not grant access to it. If the relevant entry is missing, ask your organization administrator to check your access.
- Know the exact channel or PMS integration you intend to add. Similar names, numbered instances and test integrations are not interchangeable. If you are unsure which entry to use, confirm it with support first.
- Adding an entry is not the same as activating a connection. The channel may still need property identifiers, connection settings and room/rate-plan mappings. Its appearance in the list does not confirm inventory delivery, reservation delivery or acceptance by the channel.

**Special case — ChannelRUSH Master Image:** use this entry only when support has confirmed that it belongs in your setup. Adding it can initialize settings and synchronize its room/rate mappings. Depending on existing settings, that setup can also clear stored master-inventory values for disabled fields. Do not include it in an exploratory batch of channels. A later error in the batch does not guarantee that its setup work was undone.

## Open Add Channels

### From property Admin

1. Choose the property in the property selector.
2. Open **Admin → Settings - CM**.
3. In the **Channel Manager** section, locate **Channels**.
4. Click **Add New** beside the channel list.
5. On **Add Channels**, check the property name and ID above the selectors before making any selection.

### From Org Admin

1. Choose the property in the property selector.
2. Open **Org Admin → Property Edit**.
3. Locate **Channels** near the top of **Property Edit**.
4. Click **Add New** beside **Sort**.
5. On **Add Channels**, check the property name and ID above the selectors. The breadcrumb also identifies the organization and property.

Both entry paths provide the same ten selection slots. Their return destinations differ: the property-Admin form returns to **Admin**, while the Org Admin form returns to **Property Edit** for the same property.

![Add Channels form for a demo property, showing ten empty channel selectors and the Save and Cancel controls.](https://support.channelrush.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBcmNCIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--a03524b1824fdae8de6843a868f5bafcca991f4c/add-channels-form.png)

*The property-Admin form is shown. Both forms have ten selection slots and Save/Cancel controls; you do not need to fill every slot.*

## Choose and add channels

Selections are submitted when you click **Save**. Searching or choosing an option does not itself add the channel.

1. Open a **Select channel...** field.
2. Type part of the channel name to narrow the list.
3. Choose the exact entry you need.
4. Repeat in another empty field for each additional channel, up to ten selections in this submission.
5. Leave unused fields at **Select channel...**. To remove a selection before saving, choose that empty option again.
6. Review all selected names and the property name.
7. Click **Save** once.

**If an error appears, stop and read it before submitting again.** Check the property's channel list before retrying; a failed submission is not a guarantee that every setup action was rolled back. If the result is unclear—especially if you selected **ChannelRUSH Master Image**—ask support to confirm the saved state first.

To leave without submitting the current selections, click **Cancel**. The property-Admin form returns to **Admin**; the Org Admin form returns to **Property Edit**. Cancel does not reverse a previous Save.

### Adding another instance of the same channel

Entries such as **Booking.com - [2]** and **Booking.com - [3]** represent additional instances. Do not choose them as substitutes for the ordinary entry or as a way to repair an existing connection.

Confirm with support that another instance is required. Add and verify the ordinary instance first, then add additional instances in order. The page can reject an additional instance when its preceding instance is missing.

### Existing channels and duplicate selections

If the selected channel is already assigned to the property, Save skips that entry. Selecting the same entry in more than one slot does not create another copy or reconfigure the existing connection.

A save containing only empty slots or existing channels can return a saved message without adding anything new. Check the list, not the message alone.

## Check the result and continue setup

1. After a successful Save, review **Channels** on the return page: the **Channel Manager** section of **Admin** for the property-Admin form, or **Property Edit** for the Org Admin form.
2. Confirm that each intended channel appears under the correct property.
3. Click a channel's name to open its **Channel Settings**, **ChannelRUSH CRS** included. On a CRS entry, the **[CRS]** tag before the name is a link too: it opens **CRS Settings** at **Rooms & Rates**.
4. Review the connection's setup requirements and any warnings before enabling or changing its operation. Use the [Channel Settings guide](https://help.channelrush.com/hc/channelrush/articles/channel-settings-page-ota) for the field reference, and confirm integration-specific details with support when needed.

**[NS]** beside a channel means it is not set up. Resolve the missing setup rather than adding the same entry again. Absence of **[NS]** is not proof that a channel has accepted inventory or that reservation delivery works.

This procedure confirms the property-list assignment. It does not create an account with the channel, replace channel onboarding, or test the connection. Do not send an inventory refresh merely to check that the entry was added.

## Field and control reference

| Field or control | What it does | Example or important detail |
|---|---|---|
| Property name and ID | Identifies the property receiving the selected channels. | Check both before Save; selecting channels does not change the property. |
| Ten **Select channel...** fields | Each accepts one existing entry from the channel catalog. Each starts empty. | Choose **Booking.com** in one slot and another intended channel in a different slot. Ten is the limit for one submission, not a total-property limit. |
| Search inside a selector | Filters the choices by their displayed text. | Search for **Booking** and then check the complete entry name. Typing a new name does not create a new integration. |
| Empty **Select channel...** option | Leaves that slot unused. | Empty slots are skipped; they do not remove existing channels. |
| **Save** | Validates the selected entries and saves the property assignments when the page's validation passes. | Existing or repeated entries are skipped. Special Master Image setup can occur before the entire batch has passed validation. |
| **Cancel** | Leaves without submitting the current selections. | Returns to **Admin** from the property-Admin form or **Property Edit** from the Org Admin form. It does not undo an earlier submission. |
| **Admin** breadcrumb, property-Admin form | Returns to the Channel Manager section of Admin for the same property. | Use it to inspect the existing Channels list. |
| Organization/property breadcrumbs, Org Admin form | Provide links to **OA**, **Accounts**, the organization and the property's **Property Edit** page. | The property-name/ID link returns to the property's channel list. Check context before moving to another organization or property. |

## Common problems

### Add New is missing or saving is not permitted

For the property-Admin route, ask your organization administrator to check **Channel Settings** permission and property access. For **Org Admin → Property Edit**, check **Org Admin** permission instead; the Org Admin menu can be visible without access to Property Edit. Being able to open a form does not establish permission to save it. Demonstration sign-ins can also prohibit configuration saves.

### You cannot find the intended integration

Search by part of its name and check the full result names. If it is still absent, ask support which integration should be used. Do not select a similarly named test, numbered or generic API entry to work around the missing choice.

### “You can't add an additional channel instance (i.e. [2], [3]) without a previous instance.”

Check the property's existing channel list and the exact instance names. Confirm the intended sequence before retrying. If the preceding instance is present but the message persists, contact support rather than adding unrelated entries.

### A generic PMS API entry is rejected on a production account

Some generic ChannelRUSH API entries require an integration specific to the property or company. Ask support for the correct integration. Selecting a different API version is not a safe workaround.

### A test channel is rejected

Certain test integrations can only be added to designated ChannelRUSH test organizations. Ask support to confirm the correct production entry. A test entry appearing in the selector does not mean it is suitable for your property.

If the error names a different integration from the one you selected, stop and give support both the selected name and the exact error. Do not choose another test or API entry to work around it.

### Save returns an error, or the result is uncertain

Record the error and inspect the property's **Channels** list through your entry path: **Admin → Settings - CM**, or **Org Admin → Property Edit**. Do not assume that the whole operation was undone, and do not delete/re-add a connection as a repair. If the outcome is unclear, contact support with the property name/ID, exact channel names, action time and time zone, and error text. Do not include passwords or guest/payment information.

### A channel appears but is not ready to use

Adding the entry and completing its connection setup are separate steps. Open its settings and inspect the setup warnings. If the required property identifiers or mappings are unknown, stop and obtain those details rather than guessing.

## Related

- [Channel Settings — OTA field reference](https://help.channelrush.com/hc/channelrush/articles/channel-settings-page-ota)
