Use **Hotel Status** to identify property setup warnings, review reservation-handling configuration and see which connections are configured for inventory updating.

This is a configuration overview, **not a live connection test or a delivery-success report**. Opening it does not send inventory or resend reservations.

## Before you start

You need **Org Admin** access and access to the organization and property you want to review. If you cannot open the page, ask your organization administrator to confirm your access.

## Open Hotel Status

1. Open **Org Admin → Accounts**.
2. Find the property under the correct organization and click its name.
3. On **Property Edit**, open the menu icon at the right of the property-name card header.
4. Under **General**, click **Status**. Do not choose **Updates Status**, which investigates inventory requests instead.
5. Confirm the property name above the messages and the organization/property breadcrumb.
6. Review **Hotel**, **Reservations** and **Updating**. Use the references below to interpret the findings.

The page has no editable settings, date filters or Save button. **Back**, at the top or bottom of the card, returns to **Property Edit**. Opening that editor does not require you to save anything.

## Read the result

- **Red** messages identify a setup or account condition that needs attention.
- **Yellow** messages flag a configuration or activity condition to investigate. A warning is not, by itself, evidence of a failed channel delivery.
- **Blue** messages provide configuration information or counts. They are not acknowledgements from a channel or PMS.
- **No messages / status to report.** means that section produced no messages. It does not certify that every part of the property's setup or distribution is correct.

The **Close** cross dismisses one message from the current display. It does not fix the condition or save an acknowledgement. Reloading the page evaluates the checks again and can show it again.

## Hotel: property setup and access

| Message or condition | What it checks | Safe next step |
| --- | --- | --- |
| **There are 0 room types listed for this property.** | No standard room types are listed. This is not a count of rooms available to sell. | Return to **Property Edit** and review **Standard Room Types**. Arrange the correct setup before attempting inventory updates. |
| **There are 0 channels listed for this property.** | No channels are assigned to the property. | Review **Channels** in **Property Edit** with your administrator. Adding a channel and completing its setup are separate tasks. |
| **The Min Nights feature is disabled.** | The property's Min Nights feature is off. | Check whether this is intentional. Do not enable a restriction solely to clear a warning. |
| **No users for this organization have been assigned access to this property.** | The check found no unlocked organization user with an explicit assignment to this property. | Review **Users With Access To This Property** and the intended users' access. An Org Admin may still have broader access; the message is not a complete effective-permissions audit. |
| **This property is currently locked out** | The property has reached its account lockout date. | Contact your account administrator or ChannelRUSH Support. Do not treat this as a channel-mapping error. |
| **This property is currently in an overdue (lack of payment) status.** | The account overdue date has been reached, without the property already being reported as locked out. | Ask your account administrator to reconcile the account status with Support. |

## Reservations: handling and delivery setup

![Hotel Status reservations section showing demonstration-property configuration messages](https://support.channelrush.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBdThCIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--4184ff7300c91e6ee6f48780bb176aac92b2b77f/hotel-status-reservations.png)

*Example from a demonstration property. Enabled property-wide handling can coexist with channel-specific warnings.*

### Property and channel handling

| Message or condition | Meaning and next step |
| --- | --- |
| **'Reservation Handling' is enabled.** | The property-wide setting is on. This does not prove that every channel is enabled or that a reservation reached its destination. |
| **'Reservation Handling' is not enabled.** | The property-wide setting is off. Review the intended workflow under **Reservation Settings** in **Property Edit** before changing it. |
| **This property not enabled for availability management** | Reservation handling is on, but reservation-driven availability management is off. Do not assume receiving a reservation will lower availability on other channels. Confirm which system should manage availability before changing the setting. |
| **[Channel] is not activated for reservation handling.** | A configured, eligible channel has its own reservation-handling setting off. Review that channel's settings; the property-wide enabled message does not override this finding. |
| **[Channel] — no reservations received in the past 30 days.** | For an eligible channel with settings older than 30 days and reservation handling enabled, no matching stored reservation was found by creation time in the lookback. This is not a stay-date search, a PMS-delivery check or proof of a broken connection. If bookings were expected, investigate Reservation Search and the channel's records before requesting a resend. |

The channel checks are selective, not an exhaustive audit of every assigned connection. An absent warning does not prove that a channel supports reservation handling or is working correctly.

### Delivery email checks

| Message or count | What it means | Safe next step |
| --- | --- | --- |
| **Only one form of delivery** | There is one stored delivery-email entry and no setup connection enabled for reservation push or pickup. The single email is not necessarily verified. | Review the intended primary/backup delivery arrangements with your administrator. |
| **No reservation delivery email addresses stored** or **no VERIFIED reservation delivery emails** | Reservation handling is enabled, but no verified delivery email was found. The first wording can appear even when unverified addresses already exist. Both messages can appear together. | In **Property Edit → Reservation Delivery Emails**, check existing entries and the **Verified** column before adding another address. Follow the authorized verification process; avoid duplicate entries. |
| **Only 1 verified reservation notification email, and 0 verified backup emails** | There is exactly one verified primary notification address and no verified backup. | Review whether a second primary or backup is needed. A PMS connection does not make this email check disappear. |
| **There are currently unverified reservation delivery emails.** | At least one stored address has not been verified. This warning can appear even when property-wide reservation handling is off. | Review the unverified entries and confirm the intended recipient before completing verification. |
| **N notification emails — V verified, U unverified** | Counts stored delivery-email entries and their verification state, including primary and backup entries. | Compare the counts with **Reservation Delivery Emails**. Verification is not proof that a particular notification was delivered or read. |

## Updating: configured inventory connections

![Hotel Status updating section showing demonstration-property configuration messages](https://support.channelrush.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBdkFCIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--74a41ec2f409fe0ef53ceef4266a228ab1cc6ccb/hotel-status-updating.png)

*These are setup counts and enabled settings, not counts of successful sends.*

| Message or count | Meaning and next step |
| --- | --- |
| **N updatable channels** | Counts inventory-send-capable channels with stored setup complete and inventory sending enabled. It is not the total assigned-channel count, an inventory-request count or evidence of channel acceptance. |
| **N PMS channels** | Counts setup PMS inventory-receive connections with inventory receiving enabled. It does not count every assigned PMS or prove that recent inventory was received. |
| **[Channel] is not currently setup.** | The connection lacks completed stored setup for the applicable inventory check. Review the named channel's configuration. |
| **[Channel] Inventory Send disabled.** | Setup exists for an inventory-send-capable channel, but sending is disabled. Confirm whether the connection was deliberately disabled before changing it. |
| **There are 0 updatable channels setup for this property.** | Channels are assigned, but none meet the updatable-channel conditions above. Review the named setup/disabled warnings and the intended distribution setup. A PMS-only configuration may require different expectations from an OTA distribution property. |
| **Availability management is enabled.** | The property-wide availability-management setting is on. This message does not confirm an availability change or delivery. |
| **'Auto Stop Sell = No When Allocation > 0' is enabled.** | Reports that the named property setting is on. It does not confirm that a particular date or product was reopened. |
| **'Auto Stop Sell = Yes For Restrictions Not Supported' is enabled.** | Reports that the named property setting is on. It does not confirm that a particular date or product was closed. |

A disabled PMS inventory-receive connection can be absent from the PMS count **without a separate disabled warning**. If a count is lower than expected, compare the property's assigned connections and their enabled/setup states rather than relying only on the warning list.

## Check after a correction

1. If a finding requires a change, use **Back** to return to **Property Edit** and review the relevant section or named channel. Follow the applicable setup guide and your permissions; do not change live settings merely to remove a warning.
2. After an authorized correction has been saved, reopen **General → Status** from the property header menu.
3. Confirm the same organization and property, then check whether the relevant message or count reflects the saved configuration.
4. If your question concerns an actual inventory update or reservation delivery, inspect its request/delivery status separately using the related guides below.

A cleared warning establishes only that this setup check no longer reports that condition. It does not establish that an update was queued, that a PMS received a reservation, or that a channel accepted inventory. Do not resend work solely because a setup warning disappeared.

## Common problems

- **The page or Org Admin menu is unavailable:** your account may not have the required organization-administrator access or property scope. Ask your administrator to check access. If access is confirmed and the page still fails, send Support the property, page URL and error text.
- **A dismissed warning returns:** dismissal only hid the message. Review the underlying condition. If an authorized saved correction does not change the finding after reopening Status, contact Support with the exact message and correction time/time zone.
- **The page says no emails are stored, but you can see email entries:** check their **Verified** values. Unverified entries can trigger that wording. If verified entries exist and the error persists, send Support the property and warning text; do not add duplicates or share passwords or verification codes.
- **An enabled message appears alongside a channel warning:** property-wide and channel-specific settings are separate checks. Review the named connection. If the intended settings disagree with the findings, ask Support to reconcile them before changing delivery behavior.
- **There are no recent reservations, or a connection count is unexpected:** confirm the property and intended channel scope, then compare the relevant records/settings. Escalate when expected bookings or enabled connections are missing. Include the channel, relevant dates, observation time/time zone and exact message—not payment details or unnecessary guest information. A resend is not a diagnostic test.

## Related guides

- [Property Edit Page](https://help.channelrush.com/hc/channelrush/articles/property-edit-page)
- [Investigate inventory update status for a property](https://help.channelrush.com/hc/channelrush/articles/update-status)
- [Check reservation delivery status](https://help.channelrush.com/hc/channelrush/articles/reservations-delivery-status)
