Save a room type's calculation rule for particular dates and weekdays, and check the saved settings without mistaking them for a rate update.

**Saving this page does not recalculate stored prices or send rates to channels.** Do not use the saved-settings confirmation as evidence that your selling prices changed. Applying the dated calculation is a separate, administrator-controlled workflow; confirm that workflow before creating rules you expect to affect prices.

## Before you start

- Select the correct property and an existing standard room type. These are property-level room calculations, not a channel's markup or a rate plan's calculation.
- You need the property's Channel Manager **Update - Rates** or **Settings** permission to save. A view-only user or demonstration login cannot save these changes.
- Agree on the date range, selected weekdays, calculation units and intended source rate with your administrator. A rule cannot supply a missing source price.
- Review the room's existing dated rules. Use nonoverlapping date ranges. Different weekday selections do not guarantee that overlapping ranges will be accepted.

### When can a dated rule affect prices?

The separate room-type recalculation workflow uses these rules when ChannelRUSH Master Image is configured and the room has a parent room with linked rates. For matching dates, the dated calculation replaces the room's default four-step calculation; it is not added on top of those default steps.

Do not assume the dated rule also governs ordinary global-rate entry, PMS processing or every other rate-update workflow. Ask your administrator or support to confirm the applicable workflow and the affected room/rate plans before recalculating or sending anything. This page does not provide that recalculation or delivery action.

## Open the editor

1. Select your property.
2. Open **Admin → Home**.
3. In **Channel Manager**, click **Rate Calculations**.
4. Under **Room Types**, click the room type's name.
5. Find **Rate Calculations Overrides Per Date Range**.
6. Click **Add New** to create a rule, or **Edit** beside an existing rule.
7. Confirm the **Edit Rate Calculation** page and the room name above the form.

Org Admin users may also reach this editor from the standard room-type settings page. The breadcrumb and return destination can differ, so check the property and room rather than relying on the breadcrumb alone.

## Set the dates and calculation

These controls do not autosave. Your changes are submitted only by **Save** or **Save & Refresh**.

1. Enter **Start Date** using the date picker.
2. Enter **End Date** on or after the start date. Both endpoints are included.
3. Under **Days**, leave selected only the weekdays on which the rule should apply. At least one selected weekday must occur between the two dates.
4. Enter the first adjustment in **Rate Calculation 1**.
5. Choose its unit: **% Percentage** or **Flat Fee**, shown with the property's currency symbol.
6. Enter any further adjustments in **Rate Calculation 2**, **3** and **4**, choosing the unit for each.
7. Leave unused calculation values at **0.00**, rather than blank.
8. Review the dates, weekdays, signs, units and any **Existing Rate Calculations** before saving.

A new rule starts with blank dates, all seven weekdays selected, four zero values and four **Flat Fee** units. The example below shows that unsaved starting state in a narrow layout; desktop controls can appear side by side.

![New room-type date calculation form with blank dates, all weekdays selected, four zero flat-fee adjustments, Save and Cancel](https://support.channelrush.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBZ0FDIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--b67658d996fc84ad1dd43ca2ea4cd1422aec5164/room-type-date-calculation-form.png)

### How the four steps work

The steps run in order: **1 → 2 → 3 → 4**. Each step uses the preceding step's result.

- **Flat Fee:** add the entered amount. A negative amount subtracts it.
- **% Percentage:** add that percentage of the current amount. A negative percentage discounts it.
- The property's rate-rounding setting is applied after each step. **Do Nothing** still rounds to two decimal places.

For example, with a source rate of 100.00, step 1 of **-10 % Percentage** produces 90.00. Step 2 of **25 Flat Fee** then produces 115.00. This illustrates the calculation, not a live rate preview or confirmation that a channel received that price.

**Zero is not deletion.** Four zero values still leave a dated rule. When the separate recalculation uses it, that rule replaces the default calculation with no adjustment other than rounding. Use the deletion workflow to remove an unwanted rule; do not zero it merely to disable it.

## Save and check the result

1. Click **Save** to save the rule and return to the room-type page. Alternatively, open the arrow beside Save and choose **Save & Refresh** to save and remain in this calculation editor.
2. Check for the saved-settings confirmation. A redisplayed form with your typed values is not enough to establish a successful save.
3. If you used **Save & Refresh**, click **Cancel** to return to the room-type page; this does not undo your saved rule. Find the rule under **Rate Calculations Overrides Per Date Range**.
4. Reopen it with **Edit**.
5. Verify both dates, selected weekdays, all four values and their units.

This confirms the saved configuration only. The list is not an effective-price preview. **Save & Refresh** changes where you return after saving; it does not add a recalculation or send.

If you need to check actual stored rates after a separately agreed recalculation, use [Rates & Availability — List View](https://help.channelrush.com/hc/channelrush/articles/channels-report-list-view), selecting the correct property, source, room, plans and dates. Stored master rates, requested channel values and channel acceptance are different results. A settings row or stored rate does not prove acceptance by a channel.

If the save response is missing or unclear, reopen the room's rule list before trying again. Do not click **Add New** repeatedly: the first submission may already have saved a rule.

## Edit, cancel or remove a rule

- **Edit:** open the existing rule and change its fields, then save. Moving or shortening its dates does not itself restore prices previously calculated for the old dates. Agree on any required rate correction separately.
- **Cancel:** leaves this editor without submitting the unsaved changes. It returns to the room-type page from which this workflow was opened. Cancel is not an undo for a previously saved rule.
- **Delete:** available for an existing saved rule and opens a separate confirmation page. Check the room and rule shown before confirming deletion. After confirmation, check the room's list to verify the rule is gone. Removing the configuration does not itself restore stored rates or notify channels.

If **Existing Rate Calculations** appears in the editor, it lists the room's other rules; the rule being edited is excluded. Its **Dates** column shows the date span and, when not every weekday is selected, the weekday pattern. **Rate Calculations** summarizes the adjustments. **Edit** and **Delete** refer to the rule on that row. Save or cancel your current work before navigating to another rule.

## Field reference

| Field or control | What to enter or expect |
|---|---|
| **Room name** | Confirms which standard room type owns the rule. Choose a different room from the room list, not by changing calculation fields. |
| **Start Date** | Required first date, included in the range. A new rule leaves it blank. Use the displayed date format or picker. |
| **End Date** | Required last date, also included. Use the same date for a one-day rule and select that date's weekday. The rule is a dated interval, not an annually recurring season. |
| **Days — Mon to Sun** | All selected initially. Clear weekdays you do not want. At least one must remain selected and occur in the range; selecting none does not mean every day. |
| **Rate Calculation 1** | First signed numeric adjustment and its unit. Default 0.00 Flat Fee. |
| **Rate Calculation 2** | Adjustment to step 1's result. Default 0.00 Flat Fee. |
| **Rate Calculation 3** | Adjustment to step 2's result. Default 0.00 Flat Fee. |
| **Rate Calculation 4** | Adjustment to step 3's result. Default 0.00 Flat Fee. |
| **% Percentage** | Percentage of that step's input, not a percentage of the original rate at every step. Use a negative value for a discount. |
| **Flat Fee** | Signed amount in the property's displayed currency. The numeric controls support up to five decimal places, but the property's rounding applies to each calculated result. |
| **Existing Rate Calculations** | Other saved rules for this room, when any exist. Use them to check date conflicts; the summary does not verify stored or channel prices. |
| **Save** | Submit settings and return to the room-type page. |
| **Save & Refresh** | Submit settings and return to this calculation. Available in Save's arrow menu. |
| **Cancel** | Leave without submitting current edits. |
| **Delete** | For an existing rule, open deletion confirmation. It is not a rate-restoration action. |

## Common problems

### Dates or weekdays are rejected

Both dates are required. Check that the start is not after the end, at least one weekday is selected, and a selected weekday actually occurs in that span. For a one-day rule, select that day's weekday. If a valid combination is still rejected, send support the property, room, date range, weekday selection and error text.

### An overlap error appears even though the weekdays differ

Overlapping date spans can be rejected even when the selected weekdays differ. Compare the full ranges against the other rules; do not assume that selecting Monday in one and Tuesday in another avoids the check. Do not delete valid rules or change their business dates merely to get past the message. Ask support to review the intended schedules before retrying.

### The form remains open but there is no clear save confirmation

Check date formats and numeric entries, including any blank calculation value. Use explicit zero for an unused step. Reopen the saved rule list to establish what persisted before resubmitting. If the problem continues without a useful message, provide support with the field values, action time and time zone, and whether you used **Save** or **Save & Refresh**.

### Validation refers to a different rule

Saving validates the room's other calculation and occupancy settings as well. An existing invalid setting can block your edit. Have the property administrator review the named setting; do not change unrelated pricing as a workaround. Escalate if the message does not identify what needs correction.

### The rule saved, but rates did not change

That is not evidence of a failed save: this page saves configuration without recalculating or sending prices. Confirm the intended separate workflow with your administrator or support. Repeated saves are not a delivery remedy, and a global-rate update is not a substitute for applying a dated rule.

### Save is unavailable or refused

Check your access to the selected property and the **Update - Rates** or **Settings** permission. Demonstration access does not permit settings saves. Ask your administrator to review access rather than using another property or a broader update screen to bypass the restriction.

## Related

- [Standard room-type settings](https://help.channelrush.com/hc/channelrush/articles/standard-room-type-edit-page)
- [Read rates and availability in List View](https://help.channelrush.com/hc/channelrush/articles/channels-report-list-view)
