Marcus Cole

Marcus Cole

Last updated on Nov 18, 2026

Set a booking fee's amount, calculation basis, room scope and tax treatment, then check the saved settings and guest-facing price.

Before you start

  • Select the correct property. You need Booking Engine / CRS - Settings permission to save changes.
  • Confirm the fee policy, property currency and applicable taxes before editing. These settings affect booking prices; they are not a way to collect a payment immediately.
  • This guide covers the Fee Edit page for an existing fee. Open Admin → Settings - CRS, select Rooms & Rates, and go to Fees. If the fee does not exist, Add New opens the separate fee-creation screen; create it there before returning to its name in the Fees list.
  • A saved fee is not confirmation that every connected channel has accepted the same charge. Channel support and calculation rules differ. Check any affected channel separately.

Change an existing fee

Changes stay in the form until you select Save or Save & Refresh.

  1. Select your property in the property selector.
  2. Open Admin → Settings - CRS.
  3. Select Rooms & Rates.
  4. Go to Fees.
  5. Select the fee's name.
  6. Enter the fee Name.
  7. Enter Amount as a number. For a percentage, enter 7.0 for 7%, not 0.07.
  8. Choose Amount Type: $ Flat Fee or % Percentage. Flat amounts use the property's currency; the dollar sign in this selector does not change that currency.
  9. Choose Calc Type using the calculation reference below. Do not combine % Percentage with Per Person or Per Person, Per Night. Those combinations are not supported and can prevent booking-price calculation.
  10. Review Charge Type (channels) if your channel configuration uses it. This classification is separate from how often the fee is charged.
  11. Set Enabled to Yes to include the fee, or No to stop including it in booking calculations.
  12. Review Tax % Override. Leave it blank to use applicable configured percentage taxes on fees. Entering 0 explicitly overrides those percentage taxes with zero; it does not restore the default tax treatment.
  13. Review All Room Types. If you need to change Yes to No, use the separate room-scope procedure below rather than treating this as a one-save change.
  14. Review the Content tabs and enter the appropriate Name for each content set you maintain.
  15. Select Save to return to the Fees list, or open the arrow beside Save and select Save & Refresh to save and stay in the editor.

Cancel returns to CRS Settings without submitting your pending form changes. It does not undo an earlier save.

Limit a fee to selected room types

Changing All Room Types from Yes to No requires two saves. The room checkboxes appear only after the page reloads with No saved. The first save can leave the fee applying to no rooms until you select the intended rooms and save again. Do not make this transition during active selling if even a temporary missing fee would be unacceptable; arrange the change with support first.

  1. Open the fee from CRS Settings → Rooms & Rates → Fees.
  2. Set All Room Types to No.
  3. Open the arrow beside Save.
  4. Select Save & Refresh.
  5. Review the room-type checkboxes now displayed. Select every CRS room type that should receive the fee and clear any others. Do not rely on remembered selections from an earlier configuration.
  6. Select Save & Refresh again.
  7. Confirm All Room Types remains No and the intended rooms remain selected after the reload.

If All Room Types is already No, change the displayed room selections and save once. No selected rooms means the fee applies to none of them—not all rooms.

To apply the fee to all room types again, set All Room Types to Yes and save. Review room selections afresh if you later switch back to No.

Room scope is based on CRS room types, not individual rate plans. This page does not provide a separate rate-plan or stay-date selection for the fee.

Check the result

  1. After Save, find the fee in the Fees list. Check its Amount, Type and Enabled columns. The list includes the property currency for flat amounts.
  2. Reopen the fee and verify the amount, calculation type, tax override and room scope. Check the Content names separately; a saved amount is not proof that every content name was saved correctly.
  3. Before relying on the new charge, obtain a fresh price in your booking engine or connected CRS workflow for the intended room, stay length and guest count. Inspect the fee and tax breakdown without completing a booking. If the fee is limited to selected room types, compare an included room with an excluded room.
  4. If a connected channel uses these charges, inspect that channel's current charge settings or ask support to confirm delivery. A ChannelRUSH settings confirmation does not establish channel acceptance or identical calculation there.

Saving can notify connected services that follow CRS settings. Do not repeatedly save to force delivery. There is no channel-acceptance indicator on this fee editor.

If a save reports an error, do not assume nothing changed: the fee settings and content names are saved separately. Reopen the fee and check the persisted values before deciding what needs correction.

Field reference

General settings

Field What it controls Values and practical guidance
Name The fee's main name, also used for calculated fee lines. Required. Use a clear name such as Cleaning Fee or Resort Fee.
Amount The flat amount or percentage used by the calculation. Enter a number. 7.0 means 7% when Amount Type is percentage. Clearing this field is changed to 0 when the field changes; do not use a blank amount as a reset instruction. Use Enabled = No to disable the fee.
Amount Type Whether Amount is money or a percentage. $ Flat Fee or % Percentage. The editor shows a dollar sign even when the property's currency is different. Confirm the currency in the Fees list.
Calc Type Whether a flat charge applies once, per room, per night or per person. See the calculation reference below. Person-based calculations require a flat amount.
Enabled Whether the fee participates in booking calculations. Yes or No. Disabling a fee here is not proof that an already-configured charge has been removed from a connected channel.
Account ID An optional saved identifier. Leave blank unless support has supplied a value for your configuration. Do not assume entering an ID establishes an accounting or PMS connection.
All Room Types Whether the fee applies across CRS room types or only selected ones. Yes applies across room types. No uses the displayed room selection after reload. No selected rooms means no applicable rooms.
Content → Name A separate fee name for each existing property content set. Tabs use your content-set names, such as English, German or Spanish. Enter each required translation yourself; editing one tab does not translate the others.

Calculation reference

For percentage fees, the basis is eligible rooms' room-rate amounts—not add-ons, other fees or the full tax-inclusive booking total. Percentage fee amounts are rounded to two decimal places.

Calc Type With a flat amount With a percentage
Per Reservation Charged once for the booking when its room scope applies. Percentage of the total room rates for eligible rooms.
Per Room Charged once for each eligible booked room. Percentage of each eligible room's total room rates.
Per Room, Per Night Charged for each night of each eligible booked room. Percentage of each eligible room's total room rates. The percentage is not multiplied by the night count a second time.
Per Person Charged for each adult and child in each eligible room. Not supported. Use a flat amount.
Per Person, Per Night Charged for each adult and child, for each night in each eligible room. Not supported. Use a flat amount.

Person-based fees include children; this form has no child exemption or age-band controls. If your policy needs different child treatment, ask support before using a person-based fee.

Tax % Override

This field controls percentage tax treatment for this fee in booking calculations:

  • Blank: the fee can participate in configured percentage taxes that apply to fees, subject to those taxes' own scope.
  • A percentage: the fee receives its own tax calculation at that rate instead of participating in those configured percentage-tax calculations. Enter 7.0 for 7%.
  • 0: an explicit zero percentage override for this fee. It does not mean “use the default.”

Clear the override and save to restore applicable configured percentage-tax treatment. An override does not remove independently charged flat property taxes. Check the complete breakdown rather than assuming a zero override makes the whole booking tax-free.

Charge Type (channels)

The choices are - not set -, Vat, Tax, CityTax, CleaningFee, ResortFee, ServiceCharge, DestinationCharge, PetFee and TransferFee.

This is a channel-facing classification, not the fee's frequency or tax percentage. Choose the classification that matches your fee policy and the connected channel's setup. Tax % Override, Amount Type and Calc Type remain separate controls.

Do not assume every channel can represent the same rule. In particular, selected-room fees and an unset charge classification are not sent by the Booking.com charges workflow, and Google's per-reservation fee representation is per room/per stay. If those differences affect your policy, confirm the intended channel setup with support before changing the fee. Saving this editor is not itself a confirmation that a Booking.com charges update was sent.

Common problems

The room checkboxes are missing

They are not displayed while the saved All Room Types value is Yes. Follow the two-save room-scope procedure above. Do not assume changing the selector alone has saved the scope or exposed the room choices.

The fee is missing from a fresh price

Reopen the fee and check Enabled, Amount, All Room Types and any selected rooms. Make sure the quoted room is one of the selected CRS room types. If those values are correct but the fee is still missing, contact support with the property, fee name, room type, stay dates and the price breakdown. Do not submit a real booking merely to test the fee.

The total is higher than expected

Check Calc Type, the number of rooms and nights, and whether a person-based fee includes children. Then check Tax % Override and the property taxes applied to fees. If the calculation still differs from your policy, stop changing values and send support the expected calculation and the observed breakdown.

Saving is refused or the form returns without the expected result

Confirm your Booking Engine / CRS - Settings permission, a nonblank main Name, and numeric amount/override values. A numeric-entry problem may return the form without a useful field-specific explanation. If the cause is unclear, reopen the fee to check saved values and contact support with the error text and action time/time zone. Do not repeatedly submit the same uncertain change.

Booking prices fail after a fee change

Check for % Percentage paired with Per Person or Per Person, Per Night. These combinations are unsupported. If the intended policy cannot be represented by the supported choices, ask support rather than substituting a different charge silently. Check a fresh price after any agreed correction.

The channel's fee differs from ChannelRUSH

The editor's saved values do not prove channel delivery or equivalent channel calculations. Give support the property, channel, fee name, saved settings and the channel's displayed charge. Do not send passwords, payment details or guest information.

Related